LG AC CH54 Error Code
Reverse phase detected in the electrical supply. Here's what it means, what you can safely check, and when to call a technician.
LG AC CH54 Error: Reverse phase detected in the electrical supply
When your LG ac shows a CH54 error, it is indicating: Reverse phase detected in the electrical supply. This is a specific fault code the appliance's control board uses to flag a problem it has detected — it won't clear permanently by switching the power off and on, because the underlying condition that caused it still exists.
What To Check Before Calling a Technician
Check whether this appeared after a power outage or recent electrical work on the property.
Reset the AC's circuit breaker. If the error appeared after electrical work, contact the electrician directly and mention "reverse phase detection" so they can correct the wiring — this is an electrical fault, not an AC fault. If the CH54 error persists after the checks above, a technician will be able to diagnose and fix it with the right tools — attempting to open the unit's panels or handle electrical components without training is not safe.
Frequently Asked Questions
What does the CH54 error mean?
Reverse phase detected in the electrical supply.
What should I check first?
Check whether this appeared after a power outage or recent electrical work on the property.
Can I fix this myself, or do I need a technician?
Reset the AC's circuit breaker. If the error appeared after electrical work, contact the electrician directly and mention "reverse phase detection" so they can correct the wiring — this is an electrical fault, not an AC fault.
Other LG AC Error Codes
- CH04 — Drainage issue — condensate water is not draining properly
- CH05 — Communication error between the indoor and outdoor units (also shown as E0 or CH53)
- CH07 — Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system
- CH10 — Indoor unit fan problem (the equivalent outdoor-unit fan fault shows as CH67 or EF)
- CH38 — Low refrigerant (gas) level — a protective warning, also shown as F4
- CH61 — Overheating protection — outdoor unit overheating in cooling mode, or indoor unit overheating in heating mode (also shown as P4, P6, P7, P8, or CH34 depending on model)
- CH66 — Communication or piping connection issue between the indoor and outdoor units
- CH90 — Protective error typically shown during the test-run phase right after installation (also shown as CH91 or F4 on some models)
- CH93 — Communication problem between the indoor and outdoor units, typically during the test-run phase
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.