LG AC CH07 Error Code
Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system. Here's what it means, what you can safely check, and when to call a technician.
LG AC CH07 Error: Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system
When your LG ac shows a CH07 error, it is indicating: Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system. This is a specific fault code the appliance's control board uses to flag a problem it has detected — it won't clear permanently by switching the power off and on, because the underlying condition that caused it still exists.
What To Check Before Calling a Technician
Check every connected indoor unit's mode — this error appears when one unit is set to heating while another connected unit is set to cooling or dehumidification at the same time.
Set all connected units to the same mode family: either all heating, or all cooling/dehumidification. They cannot run in opposite modes simultaneously. If the CH07 error persists after the checks above, a technician will be able to diagnose and fix it with the right tools — attempting to open the unit's panels or handle electrical components without training is not safe.
Frequently Asked Questions
What does the CH07 error mean?
Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system.
What should I check first?
Check every connected indoor unit's mode — this error appears when one unit is set to heating while another connected unit is set to cooling or dehumidification at the same time.
Can I fix this myself, or do I need a technician?
Set all connected units to the same mode family: either all heating, or all cooling/dehumidification. They cannot run in opposite modes simultaneously.
Other LG AC Error Codes
- CH04 — Drainage issue — condensate water is not draining properly
- CH05 — Communication error between the indoor and outdoor units (also shown as E0 or CH53)
- CH10 — Indoor unit fan problem (the equivalent outdoor-unit fan fault shows as CH67 or EF)
- CH38 — Low refrigerant (gas) level — a protective warning, also shown as F4
- CH54 — Reverse phase detected in the electrical supply
- CH61 — Overheating protection — outdoor unit overheating in cooling mode, or indoor unit overheating in heating mode (also shown as P4, P6, P7, P8, or CH34 depending on model)
- CH66 — Communication or piping connection issue between the indoor and outdoor units
- CH90 — Protective error typically shown during the test-run phase right after installation (also shown as CH91 or F4 on some models)
- CH93 — Communication problem between the indoor and outdoor units, typically during the test-run phase
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.