LG AC CH04 Error Code
Drainage issue — condensate water is not draining properly. Here's what it means, what you can safely check, and when to call a technician.
LG AC CH04 Error: Drainage issue — condensate water is not draining properly
When your LG ac shows a CH04 error, it is indicating: Drainage issue — condensate water is not draining properly. This is a specific fault code the appliance's control board uses to flag a problem it has detected — it won't clear permanently by switching the power off and on, because the underlying condition that caused it still exists.
What To Check Before Calling a Technician
For ceiling-type units, this means condensate formed inside the indoor unit is not draining. For window/portable types, this can be normal on humid or rainy days as condensate builds up faster than it evaporates.
Power cycle first (unplug or switch off the breaker for 5 minutes). For window/portable types, condensate can be manually drained via the drain port on the lower rear of the unit. If CH04 (sometimes shown as FL) recurs even on dry days, the unit needs inspection. If the CH04 error persists after the checks above, a technician will be able to diagnose and fix it with the right tools — attempting to open the unit's panels or handle electrical components without training is not safe.
Frequently Asked Questions
What does the CH04 error mean?
Drainage issue — condensate water is not draining properly.
What should I check first?
For ceiling-type units, this means condensate formed inside the indoor unit is not draining. For window/portable types, this can be normal on humid or rainy days as condensate builds up faster than it evaporates.
Can I fix this myself, or do I need a technician?
Power cycle first (unplug or switch off the breaker for 5 minutes). For window/portable types, condensate can be manually drained via the drain port on the lower rear of the unit. If CH04 (sometimes shown as FL) recurs even on dry days, the unit needs inspection.
Other LG AC Error Codes
- CH05 — Communication error between the indoor and outdoor units (also shown as E0 or CH53)
- CH07 — Conflicting operation modes on a multi-unit (2-in-1 or ceiling-type) system
- CH10 — Indoor unit fan problem (the equivalent outdoor-unit fan fault shows as CH67 or EF)
- CH38 — Low refrigerant (gas) level — a protective warning, also shown as F4
- CH54 — Reverse phase detected in the electrical supply
- CH61 — Overheating protection — outdoor unit overheating in cooling mode, or indoor unit overheating in heating mode (also shown as P4, P6, P7, P8, or CH34 depending on model)
- CH66 — Communication or piping connection issue between the indoor and outdoor units
- CH90 — Protective error typically shown during the test-run phase right after installation (also shown as CH91 or F4 on some models)
- CH93 — Communication problem between the indoor and outdoor units, typically during the test-run phase
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.