Daikin AC U4 Error Code
Communication failure between the indoor and outdoor units. Here's what it means, what you can safely check, and when to call a technician.
Daikin AC U4 Error: Communication failure between the indoor and outdoor units
When your Daikin ac shows a U4 error, it is indicating: Communication failure between the indoor and outdoor units. This is a specific fault code the appliance's control board uses to flag a problem it has detected — it won't clear permanently by switching the power off and on, because the underlying condition that caused it still exists.
What To Check Before Calling a Technician
Check that the outdoor unit is actually receiving power — this code can appear simply because the outdoor unit's power supply is off. Also check whether this started after any wiring work near the unit.
Confirm the outdoor unit has power first. If it does and the error persists, the indoor-outdoor connecting wiring (F1/F2 terminals) needs a technician to inspect for a short circuit or loose connection. If the U4 error persists after the checks above, a technician will be able to diagnose and fix it with the right tools — attempting to open the unit's panels or handle electrical components without training is not safe.
Frequently Asked Questions
What does the U4 error mean?
Communication failure between the indoor and outdoor units.
What should I check first?
Check that the outdoor unit is actually receiving power — this code can appear simply because the outdoor unit's power supply is off. Also check whether this started after any wiring work near the unit.
Can I fix this myself, or do I need a technician?
Confirm the outdoor unit has power first. If it does and the error persists, the indoor-outdoor connecting wiring (F1/F2 terminals) needs a technician to inspect for a short circuit or loose connection.
Other Daikin AC Error Codes
- U0 — Shortage of refrigerant
- U1 — Reverse phase or open phase in the power supply
- U2 — Abnormal power supply voltage or an instantaneous power failure
- A1 — Fault in the indoor unit's circuit board (PCB)
- A5 — High pressure protection (heating mode) or freeze-up protection (cooling mode) — commonly caused by a clogged air filter
- A6 — Fault in the indoor unit's fan motor
- E1 — Fault in the outdoor unit's circuit board (PCB)
- E3 — High pressure switch activated — commonly caused by a dirty outdoor unit heat exchanger
- E7 — Fault in the outdoor unit's fan motor system
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.