Daikin AC U2 Error Code
Abnormal power supply voltage or an instantaneous power failure. Here's what it means, what you can safely check, and when to call a technician.
Daikin AC U2 Error: Abnormal power supply voltage or an instantaneous power failure
When your Daikin ac shows a U2 error, it is indicating: Abnormal power supply voltage or an instantaneous power failure. This is a specific fault code the appliance's control board uses to flag a problem it has detected — it won't clear permanently by switching the power off and on, because the underlying condition that caused it still exists.
What To Check Before Calling a Technician
Check whether this happened during a power fluctuation, brief outage, or voltage dip — common during unstable grid conditions.
Power cycle the unit (switch off at the breaker for a few minutes, then restore). If it recurs without any power disturbance, the main circuit wiring needs a technician to inspect. If the U2 error persists after the checks above, a technician will be able to diagnose and fix it with the right tools — attempting to open the unit's panels or handle electrical components without training is not safe.
Frequently Asked Questions
What does the U2 error mean?
Abnormal power supply voltage or an instantaneous power failure.
What should I check first?
Check whether this happened during a power fluctuation, brief outage, or voltage dip — common during unstable grid conditions.
Can I fix this myself, or do I need a technician?
Power cycle the unit (switch off at the breaker for a few minutes, then restore). If it recurs without any power disturbance, the main circuit wiring needs a technician to inspect.
Other Daikin AC Error Codes
- U0 — Shortage of refrigerant
- U1 — Reverse phase or open phase in the power supply
- U4 — Communication failure between the indoor and outdoor units
- A1 — Fault in the indoor unit's circuit board (PCB)
- A5 — High pressure protection (heating mode) or freeze-up protection (cooling mode) — commonly caused by a clogged air filter
- A6 — Fault in the indoor unit's fan motor
- E1 — Fault in the outdoor unit's circuit board (PCB)
- E3 — High pressure switch activated — commonly caused by a dirty outdoor unit heat exchanger
- E7 — Fault in the outdoor unit's fan motor system
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.