Serving Tamil Nadu & Surrounding Areas Mon–Sun: 8AM–9PM Same-Day Response
CALL NOW 99520 78200
Washing Machine Troubleshooting Guide

How to Fix Washing Machine Noise While Spinning

A loud, vibrating, or banging noise during the spin cycle is a common issue that often points to simple maintenance problems. Use this guide to diagnose whether your washing machine needs a quick adjustment or professional repair.

Common Causes for Spinning Noise

  1. Uneven leveling: If the machine is not perfectly flat on the floor, it will vibrate violently during high-speed spins.
  2. Foreign objects: Coins, buttons, or hairpins trapped in the drum or pump filter often create a metallic rattling sound.
  3. Worn-out drum bearings: A loud grinding or roaring noise, especially as the spin speed increases, usually indicates failing tub bearings.
  4. Overloading: Packing too many clothes can cause the drum to become unbalanced and hit the outer casing.

Safe Steps to Try Before Calling a Technician

  1. Check the leveling: Place a spirit level on top of the machine and adjust the feet until it is perfectly balanced on all four corners.
  2. Inspect the drum: Reach inside the drum to check for loose items trapped between the seal and the metal basket.
  3. Clean the drain pump filter: Locate the small access door at the bottom front of the machine, drain the water, and remove any debris found in the filter.
  4. Redistribute the load: Ensure the clothes are evenly spread inside the drum and not bunched up on one side.

Always unplug the washing machine from the power outlet and turn off the water supply before inspecting the pump filter or moving the unit to avoid electrical shock or water damage.

How It Works

  1. 1

    Call or WhatsApp

    Tell us the appliance, issue, and your area.

  2. 2

    Technician Visits

    We inspect the unit and give an upfront quote.

  3. 3

    Repair & Pay

    Approve the quote, repair completed same-day, pay after.

Why Choose Us

What You Get With Every Repair

30-Day Repair Warranty

If the same issue recurs within 30 days of the repair, we'll fix it again at no extra visit charge.

Frequently Asked Questions

Why does my washing machine make a loud thumping noise?

A thumping noise is usually caused by an unbalanced load. Try stopping the cycle, redistributing the wet clothes evenly, and restarting the spin.

Can I replace the drum bearings myself?

Replacing drum bearings is a complex task that requires disassembling the entire outer tub. It is highly recommended to hire a professional technician for this repair.

Is it safe to use the machine if it makes a grinding noise?

No, a grinding noise often indicates mechanical failure. Continued use can cause further damage to the motor or drum assembly, leading to more expensive repairs.

How often should I clean the pump filter?

It is good practice to check and clean your pump filter every 3 to 6 months to prevent debris buildup and ensure proper drainage.

Book Your Service Now

Get a Technician Today

Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.

📞 Call Now — 99520 78200