Samsung Washing Machine 5 Time Blinking Error: Troubleshooting Guide
If your Samsung washing machine displays a 5-time blinking error, it typically indicates a communication failure between the main control board and the motor or a faulty tachometer sensor. This issue prevents the drum from spinning correctly, often stopping the cycle mid-wash.
How to Reset Your Samsung Washing Machine
- Power off the washing machine and unplug the power cord from the wall outlet.
- Wait for at least 10 to 15 minutes to allow the residual electricity in the capacitors to discharge completely.
- Plug the machine back directly into a wall socket, avoiding the use of extension cords or power strips.
- Power on the unit and run a 'Rinse + Spin' cycle to see if the error code has cleared.
Safe Steps to Try Before Calling a Technician
- Check for an overloaded drum, as heavy or unbalanced loads can trigger motor sensor errors; remove some items and restart.
- Inspect the wiring harness near the motor for any visible signs of loose connections or rodent damage.
- Ensure the washing machine is perfectly level on the floor, as vibrations can sometimes cause sensor misalignment.
Always disconnect the power supply before inspecting the machine. If you are uncomfortable opening the back panel or handling electrical components, please contact a professional technician to avoid the risk of electric shock.
How It Works
-
1
Call or WhatsApp
Tell us the appliance, issue, and your area.
-
2
Technician Visits
We inspect the unit and give an upfront quote.
-
3
Repair & Pay
Approve the quote, repair completed same-day, pay after.
What You Get With Every Repair
If the same issue recurs within 30 days of the repair, we'll fix it again at no extra visit charge.
-
Transparent Pricing
Visit charge, labour, and parts all confirmed before we start, no surprises.
-
24 of 22 Cities Covered
Local technicians across Tamil Nadu, not a call-center dispatch queue. See coverage →
-
Same-Day Service
Most repairs completed the same day, subject to parts availability.
-
All Major Brands
We service LG, Samsung, IFB and more.
-
Independent Service
Not tied to any manufacturer's targets — we recommend what's actually best for you.
-
Easy Booking
Call or WhatsApp — get your visit confirmed in minutes, no app required.
Frequently Asked Questions
Does 5 blinks always mean the motor is broken?
Not necessarily. While it often points to a motor issue, it can also be caused by a loose wire, a faulty hall sensor, or a glitch in the main control board.
Can I fix this error myself?
You can perform a hard reset and check for loose wires. However, if the error persists after a reset, it usually requires a multimeter test of the motor or a board repair by a professional.
Will a power surge cause this blinking error?
Yes, voltage fluctuations can cause the control board to lose communication with the motor, triggering the 5-blink safety sequence.
Is it safe to keep using the machine with this error?
No, you should not continue to use the machine. The error indicates a mechanical or electrical fault that could lead to further damage to the motor or the control PCB.
Book Washing Machine Repair in Your City
-
Washing Machine Repair — Chennai
-
Washing Machine Repair — Coimbatore
-
Washing Machine Repair — Tiruppur
-
Washing Machine Repair — Madurai
-
Washing Machine Repair — Tiruchirappalli
-
Washing Machine Repair — Chengalpattu
-
Washing Machine Repair — Kanchipuram
-
Washing Machine Repair — Thiruvallur
-
Washing Machine Repair — Nagercoil
Troubleshooting Samsung 5 Time Blinking Errors
If your Samsung washing machine is flashing a 5-time blinking error code, it typically indicates a communication breakdown between the main control board and the motor or the Tacho sensor. This sensor is responsible for monitoring the speed and rotation of the drum. When the control board fails to receive a signal from the motor, the appliance halts operation as a safety precaution to prevent further damage.
Step-by-Step Reset Procedure
Before calling for professional assistance, you can attempt a manual reset to see if the error is a temporary electronic glitch:
- Power Cycle: Unplug the washing machine from the wall outlet completely.
- Wait: Leave the machine disconnected for at least 10 to 15 minutes. This allows the capacitors on the control board to discharge fully.
- Reconnect: Plug the machine back into the power source.
- Test: Select a short cycle, such as a rinse or spin cycle, to determine if the error persists.
Common Causes
If the reset does not resolve the issue, the problem may be hardware-related. Common culprits include a loose wiring harness connecting the motor, a faulty Tacho sensor, or a damaged motor carbon brush. In some cases, the main PCB may require repair or replacement if it is no longer sending the correct voltage to the motor assembly.
Does the 5-blink error always mean the motor is broken?
Not necessarily. While it often points to the motor, it can also be caused by loose wiring connections or a faulty sensor. Our technicians can perform a diagnostic check to pinpoint the exact source of the communication failure.
Can I fix this by replacing the PCB myself?
We recommend professional handling for PCB issues. Incorrect installation or handling can lead to further electrical damage or safety hazards. Our independent technicians are experienced in handling complex electronic repairs across Tamil Nadu.
If the error persists after a reset, our experienced technicians are ready to help. We offer reliable same-day service wherever you are located in Tamil Nadu. For professional assistance, please call us at 99520 78200.
Get a Technician Today
Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.