Serving Tamil Nadu & Surrounding Areas Mon–Sun: 8AM–9PM Same-Day Response
CALL NOW 99520 78200
Washing Machine Troubleshooting Guide

IFB Washing Machine Draining Continuously? Here is How to Fix It

If your IFB washing machine is constantly draining water during the wash cycle, it is likely due to a plumbing issue known as the 'siphon effect'. This occurs when the drain hose is positioned incorrectly, causing water to flow out of the machine as fast as it enters.

Understanding the Siphon Effect

  1. Check the height of your drain hose; it must be positioned at a height between 60cm and 90cm from the floor.
  2. Ensure the drain hose is not pushed too far into the standpipe, as this creates an airtight seal that pulls water out of the drum.
  3. Verify that the end of the drain hose is not submerged in water, as this prevents air from breaking the siphon.

Safe Steps to Try Before Calling a Technician

  1. Unplug the machine from the power socket to ensure safety before inspecting the rear plumbing.
  2. Detach the drain hose from the standpipe and ensure it is secured at the correct height using the provided U-bend bracket.
  3. Inspect the drain hose for any kinks, twists, or blockages that might be interfering with the water flow.
  4. Run a short rinse cycle to see if the water remains in the drum after the hose height has been corrected.

Always disconnect the power supply before touching any internal components or plumbing connections to avoid the risk of electric shock.

How It Works

  1. 1

    Call or WhatsApp

    Tell us the appliance, issue, and your area.

  2. 2

    Technician Visits

    We inspect the unit and give an upfront quote.

  3. 3

    Repair & Pay

    Approve the quote, repair completed same-day, pay after.

Why Choose Us

What You Get With Every Repair

30-Day Repair Warranty

If the same issue recurs within 30 days of the repair, we'll fix it again at no extra visit charge.

Frequently Asked Questions

Why does my IFB washing machine keep filling and draining at the same time?

This is almost always caused by the siphon effect. If the drain hose is too low or pushed too deep into the drain pipe, gravity pulls the water out of the machine continuously.

What is the correct height for the drain hose?

The drain hose should be secured at a height of at least 60cm and no more than 90cm from the floor level to ensure proper drainage and prevent siphoning.

Can a faulty drain pump cause continuous draining?

While possible, a faulty pump usually results in the machine failing to drain at all or making loud noises. If it drains continuously, it is usually a hose positioning issue.

Do I need a plumber or an appliance technician?

If the hose height is correct and the machine still drains continuously, there may be an issue with the water level sensor or the main control board, which requires a professional technician.

Why is my IFB washing machine water draining continuously?

One of the most frequent reasons customers across Tamil Nadu report an IFB washing machine draining continuously is the siphon effect. This occurs when the drain hose is installed incorrectly, causing water to be pulled out of the drum by gravity as soon as it enters the machine.

Understanding the Siphon Effect

The drain hose of your IFB washing machine must be positioned at a specific height—typically between 60cm and 90cm from the floor. If the hose is placed too low, or if the end of the hose is submerged in water within the drain pipe, it creates a vacuum. This vacuum continuously siphons water out of the machine, preventing the tub from filling properly and forcing the pump to run non-stop. To troubleshoot this, ensure the drain hose has a proper "high loop" or is securely hooked into a standpipe that is higher than the water level inside the machine.

Can an incorrect drain hose height damage my IFB machine?

Yes, if the machine drains continuously, the pump may overheat and fail prematurely because it is constantly working to empty water that should be staying in the drum. Additionally, your clothes will not be cleaned properly as the machine cannot maintain the required water level for the wash cycle.

What should I do if the drain hose is positioned correctly but the issue persists?

If the hose height is correct and the machine still drains constantly, the issue may be a faulty water level pressure switch or a stuck drain pump valve. In such cases, professional inspection is recommended to avoid further damage to the internal components.

If you are unable to resolve the drainage issue yourself, our independent technicians are available to provide expert support. We offer same-day service across our service areas to get your appliance back in working order. Contact us at 99520 78200 to schedule a visit.

Book Your Service Now

Get a Technician Today

Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.

📞 Call Now — 99520 78200