Serving Tamil Nadu & Surrounding Areas Mon–Sun: 8AM–9PM Same-Day Response
CALL NOW 99520 78200
Washing Machine Troubleshooting Guide

How to Fix TACO Error in IFB Washing Machine

The TACO error code on an IFB washing machine typically indicates a fault with the tachogenerator, which is responsible for monitoring the motor's rotation speed. When the control board fails to receive accurate speed signals, the machine halts operation to prevent motor damage.

Understanding the TACO Fault

  1. The tachogenerator is a small sensor attached to the motor that tracks how fast the drum is spinning.
  2. A TACO error occurs when the sensor is loose, the wiring is disconnected, or the magnet inside the sensor has cracked or failed.
  3. This error prevents the machine from starting a wash cycle to protect the motor from spinning out of control.

Safe Steps to Try Before Calling a Technician

  1. Power off the washing machine and unplug it from the wall socket for at least 10 minutes to allow the control board to reset.
  2. Check if the machine is overloaded, as excessive weight can sometimes cause the motor to struggle and trigger a false speed sensor error.
  3. Ensure the drum can rotate freely by hand when the machine is off; if it is jammed, the motor cannot reach the required speed.
  4. Plug the machine back in and attempt a simple spin-only cycle to see if the error clears.

Always unplug the appliance before performing any checks. If the error persists, do not attempt to disassemble the motor assembly yourself, as this requires specialized tools and carries a high risk of electrical shock.

How It Works

  1. 1

    Call or WhatsApp

    Tell us the appliance, issue, and your area.

  2. 2

    Technician Visits

    We inspect the unit and give an upfront quote.

  3. 3

    Repair & Pay

    Approve the quote, repair completed same-day, pay after.

Why Choose Us

What You Get With Every Repair

30-Day Repair Warranty

If the same issue recurs within 30 days of the repair, we'll fix it again at no extra visit charge.

Frequently Asked Questions

Can I fix the TACO error by just resetting the machine?

A reset often clears temporary software glitches, but if the tachogenerator sensor is physically damaged or the wiring is loose, the error will return immediately.

Is the TACO error related to the water supply?

No, the TACO error is strictly related to the motor and speed sensing system, not the water inlet or drainage.

What should I do if the error persists after a reset?

If the error remains, the tachogenerator likely needs a technical inspection or replacement. Contact a certified technician to inspect the motor connections.

Is it safe to keep using the machine with a TACO error?

No, you should not attempt to bypass the error. Continuing to force the machine to run can lead to permanent damage to the motor or the main control board.

Understanding and Troubleshooting the TACO Error in IFB Washing Machine

If your IFB washing machine display shows a "TACO" error, it indicates a fault related to the tachogenerator. This component is responsible for sensing the motor's speed and relaying that data to the control board. When the sensor fails to send a signal, or if the connection is interrupted, the machine halts operation to prevent motor damage.

Steps to Reset and Troubleshoot

Before calling for professional help, you can attempt a simple reset to see if the error is a temporary glitch:

  1. Power Cycle: Turn off the washing machine and unplug it from the wall outlet.
  2. Wait: Allow the machine to remain disconnected for at least 15–20 minutes to let the internal capacitors discharge.
  3. Restart: Plug the machine back in and attempt a new wash cycle.

If the TACO error persists, it often points to a loose wiring harness, a faulty tachogenerator coil, or an issue with the motor carbon brushes. As an independent repair service, our technicians are well-versed in diagnosing these motor-related faults across Tamil Nadu.

Can I fix the TACO error by myself?

While a power cycle may clear temporary errors, the TACO code usually requires technical intervention. If the tachogenerator or motor brushes are worn out, they will need to be inspected or replaced by a professional to ensure the machine functions safely.

What causes the TACO error to appear?

This error is primarily caused by a communication breakdown between the motor and the control board. Common culprits include damaged wiring, a malfunctioning tachogenerator, or motor carbon brushes that have reached the end of their lifespan.

If you are unable to resolve the issue, our team is ready to assist you. We provide reliable, same-day service wherever you are located. Contact us today at 99520 78200 to schedule a visit.

Book Your Service Now

Get a Technician Today

Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.

📞 Call Now — 99520 78200