Serving Tamil Nadu & Surrounding Areas Mon–Sun: 8AM–9PM Same-Day Response
CALL NOW 99520 78200
Washing Machine Troubleshooting Guide

IFB Top Load Washing Machine Water Draining Issues

If your IFB top load washing machine is failing to drain water properly, it is often due to a simple installation error or a clogged filter. These issues can usually be resolved at home without professional intervention. Follow this guide to troubleshoot and restore your machine's drainage function.

Checking Drain Hose Height and Positioning

  1. Ensure the drain hose is not positioned too low, as this can cause siphoning where water drains out as fast as it fills.
  2. Verify that the drain hose is positioned at a height between 85cm and 120cm from the floor level.
  3. Check that the hose is not kinked, bent, or crushed behind the machine, which restricts water flow.
  4. Ensure the end of the drain hose is not submerged in water inside the drain pipe or floor trap.

Safe Steps to Try Before Calling a Technician

  1. Turn off the power supply and unplug the machine before inspecting any components.
  2. Locate the drain pump filter, usually found at the bottom or back of the unit, and place a shallow tray underneath to catch residual water.
  3. Unscrew the filter cap carefully and remove any trapped debris, coins, lint, or small objects blocking the impeller.
  4. Rinse the filter under running water to remove slime or buildup, then securely screw it back into place.

Always disconnect the power plug from the wall socket before opening any panels or touching the drain pump to avoid the risk of electric shock.

How It Works

  1. 1

    Call or WhatsApp

    Tell us the appliance, issue, and your area.

  2. 2

    Technician Visits

    We inspect the unit and give an upfront quote.

  3. 3

    Repair & Pay

    Approve the quote, repair completed same-day, pay after.

Why Choose Us

What You Get With Every Repair

30-Day Repair Warranty

If the same issue recurs within 30 days of the repair, we'll fix it again at no extra visit charge.

Frequently Asked Questions

Why does my washing machine drain water while it is filling?

This is typically caused by the drain hose being placed too low on the floor. Raising the hose to the recommended height creates a gravity loop that stops siphoning.

How often should I clean the drain pump filter?

It is recommended to inspect and clean the drain pump filter every 3 to 6 months to prevent blockages and ensure efficient drainage.

What should I do if the drain pump makes a loud grinding noise?

A grinding noise often indicates a foreign object like a coin or hair clip is stuck in the pump impeller. Clean the filter immediately; if the noise persists, the pump may be damaged.

Can I use chemical drain cleaners in my washing machine?

No, never use harsh chemical drain cleaners designed for sinks. These can damage the internal rubber seals and plastic components of your IFB washing machine.

Troubleshooting IFB Top Load Washing Machine Water Draining Out Issues

If you notice water continuously draining out of your IFB top load washing machine, it often points to a simple installation error or a minor blockage. Before calling for professional assistance, you can perform a few basic checks to see if the issue can be resolved on-site.

1. Check the Drain Hose Height

The most frequent cause of water siphoning out is an incorrectly positioned drain hose. For IFB top load models, the drain hose must be positioned at a specific height—typically between 60cm and 90cm from the floor. If the hose is placed too low, gravity will cause the water to drain out as soon as it enters the drum. Ensure the hose is securely hooked into the standpipe or sink at the correct height to prevent this siphoning effect.

2. Inspect the Drain Pump Filter

If the drain hose is positioned correctly, the issue may be a clogged drain pump filter. Debris such as coins, lint, or small fabric pieces can prevent the pump from closing properly, leading to constant leakage. Locate the filter access panel, usually found at the bottom of the machine. Place a shallow tray underneath, unscrew the filter, and remove any trapped debris. Rinse the filter under running water before securing it back tightly.

Why does my washing machine drain water while filling?

This is usually caused by the drain hose being placed too low, which creates a siphoning effect. Raising the hose to the manufacturer-recommended height usually solves this problem.

Can a faulty drain pump cause water to leak out?

Yes, if the drain pump filter is obstructed or the pump seal is damaged, water may leak or drain out prematurely. Cleaning the filter often resolves minor blockages.

If these steps do not resolve the issue, our independent technicians are ready to help. We provide reliable, same-day service across Tamil Nadu to get your appliance back in working order. Contact us at 99520 78200 to schedule your repair.

Book Your Service Now

Get a Technician Today

Opens WhatsApp with your details pre-filled — we'll confirm your visit window directly. Trouble opening WhatsApp? Call us instead.

📞 Call Now — 99520 78200