How to Clean Your Washing Machine Drain Pump Filter

Step-by-Step: Locating and Removing the Filter

1. Locate the small square or rectangular flap usually found at the bottom right corner of your washing machine's front panel.
2. Open the flap using a flat-head screwdriver or a coin to gently pry it open.
3. Place a shallow tray or a thick towel on the floor to catch the residual water that will spill out once the filter is opened.
4. Slowly unscrew the filter cap in a counter-clockwise direction. Do not force it; if it is stuck, there may be debris blocking the threads.
5. Remove the filter completely, clear out any lint, coins, or hair, and rinse it under running water.
6. Clean the filter housing cavity with a damp cloth before screwing the filter back in tightly to prevent leaks.

Safe Steps to Try Before Calling a Technician

1. Check if the drain hose is kinked or bent behind the machine, preventing water flow.
2. Verify that the drain hose is not inserted too deeply into the standpipe, which can cause a siphon effect.
3. Run a 'Drain/Spin' cycle after cleaning the filter to ensure the pump is operating smoothly without error codes.

1. 1

   Call or WhatsApp

   Tell us the appliance, issue, and your area.

2. 2

   Technician Visits

   We inspect the unit and give an upfront quote.

3. 3

   Repair & Pay

   Approve the quote, repair completed same-day, pay after.

Frequently Asked Questions