Godrej WT 600C Washing Machine Troubleshooting Guide

Common Error Codes and Reset Procedure

1. E1 Error: Indicates a water inlet issue. Check if the water tap is fully open and the inlet hose is not kinked.
2. E2 Error: Indicates a door open fault. Ensure the lid is securely closed and the sensor is not obstructed by lint or debris.
3. E3 Error: Indicates a drainage problem. Check the drain hose for blockages or ensure it is positioned at the correct height.
4. Reset Procedure: Power off the machine and unplug it from the wall socket for 10 minutes to clear the memory, then plug it back in and select a fresh cycle.

Safe Steps to Try Before Calling a Technician

1. Check the power supply by plugging another appliance into the same socket to ensure the outlet is functional.
2. Inspect the leveling feet of the machine; an uneven base often causes excessive vibration and sensor errors.
3. Clean the lint filter located inside the drum, as a clogged filter can prevent the machine from completing cycles.
4. Verify that the water pressure is sufficient, as low pressure can trigger inlet timeout errors.

1. 1

   Call or WhatsApp

   Tell us the appliance, issue, and your area.

2. 2

   Technician Visits

   We inspect the unit and give an upfront quote.

3. 3

   Repair & Pay

   Approve the quote, repair completed same-day, pay after.

Frequently Asked Questions