How to Fix Godrej Washing Machine Drain Problems

Cleaning the Drain Filter

1. For front-load models, locate the small service flap at the bottom right corner, open it, and place a shallow tray underneath to catch excess water.
2. Unscrew the filter cap slowly in a counter-clockwise direction to release trapped water, then remove the filter completely.
3. Clean the filter under running water to remove lint, coins, or debris, and inspect the pump cavity for any obstructions before reinserting.
4. For top-load models, the drain filter is often located inside the drum or at the rear; consult your manual to access the lint trap and clear it of any buildup.

Safe Steps to Try Before Calling a Technician

1. Check the drain hose at the back of the machine for any sharp kinks, bends, or crushing caused by the machine being pushed too close to the wall.
2. Ensure the drain hose is not inserted too deeply into the standpipe, as this can create a vacuum effect that prevents proper drainage.
3. Verify that the drain hose height is correct; it should generally be between 60cm and 100cm from the floor to ensure gravity-assisted drainage.
4. Run a 'Spin Only' cycle after clearing blockages to test if the water pumps out effectively.

1. 1

   Call or WhatsApp

   Tell us the appliance, issue, and your area.

2. 2

   Technician Visits

   We inspect the unit and give an upfront quote.

3. 3

   Repair & Pay

   Approve the quote, repair completed same-day, pay after.

Frequently Asked Questions