Troubleshooting the Bosch Series 4 Washing Machine Tap Symbol

Common Causes for the Tap Error

1. Check that the water supply tap connected to the washing machine is turned fully on.
2. Inspect the inlet hose at the back of the machine to ensure it is not kinked, bent, or crushed against the wall.
3. Check for a clogged inlet filter located at the point where the hose connects to the machine or the tap.

Safe Steps to Try Before Calling a Technician

1. Turn off the water supply tap and unscrew the inlet hose carefully to avoid water spills.
2. Remove the small mesh filter inside the valve using needle-nose pliers and rinse it under running water to remove sediment or debris.
3. Check your home's main water pressure to ensure there is a steady flow reaching the appliance area.
4. Reconnect the hose tightly, turn the tap back on, and run a short rinse cycle to see if the error clears.

1. 1

   Call or WhatsApp

   Tell us the appliance, issue, and your area.

2. 2

   Technician Visits

   We inspect the unit and give an upfront quote.

3. 3

   Repair & Pay

   Approve the quote, repair completed same-day, pay after.

Frequently Asked Questions